Product Details
Fiberhome AN5516-06Basic Configuration: Fiberhome AN5516-01 Chassis, 2HSWA main control boards,2*HU1A 5-Ports Uplink OLT Board(1*10G Ports and 4*GE Ports), 2*PWR DC power boards, 1*GCOB 16-ports GPON serivce boards with C+ SFP module
Overview
AN5516-06 Medium OLT (6U)
Compact carrier-level central office equipment
Suitable for medium density user scene access
Equipment size mm480W / 265H / 230D
Total number of slots 10
Service slot 6
Exchange capacity of 976G
Backplane Broadband 1.6T
Single frame PON port capacity 96 PON port
EPON / GPON / 10G PON / P2P common platform
Software and Business Boards are common to AN5516-01
1. Super Access Ability
High capacity and Density carrier-class 10 Gigabit platforms supporting 128 PON ports, switch card capacity of 976 G and backplane bus capacity of 3.52 T.
Support STM-1/E1 private uplink interface and Maximum up to 16×16GE downlink interfaces.
It has capability to support split-ratio of 1:32/64/128 long haul transmission and CLASS C+ enabled optical module.
2. Multi-service Access
Provide Internet, Voice, IPTV, CATV and TDM services.
Support IEEE 1588v2 protocol and 1PPS+TOD Clock interface.
Support OSPF, VRRP and RIP L3 protocols.
Common platform of EPON/GPON/10G PON/P2P for FTTX Smooth evolution.
3. High Reliability Optimization Design
Standard 19” inches cabinet supporting 2 service slots.
Full front card and front lines design.
Support hot plug for all cards and PON modules.
Support redundancy error-check protection for services, controller and uplink cards.
End-to-end protection, uplink ports RSTP/LACP protection and downlink PON port millisecond level switch protection.
4. Green Energy
With high performance and low power consumption chip the overall power consumption is lower than the average industry level 8-level temperature control intelligent fan supporting free ports sleep mode and energy saving.
Tech Specs
Model No. |
AN5516-01 |
AN5516-04 |
AN5516-06 |
Dimension: |
620*620*440mm |
600*430*230mm |
550*460*380mm |
Operating Environment |
Temperature: -25℃~+55℃
Humidity:5%~95% (non-condensing)
|
Temperature: -40℃~+65℃
Humidity:5%~95% (non-condensing
|
Temperature: -40℃~+65℃
Humidity:5%~95% (non-condensing
|
Power Supply Parameters |
-48V DC input Supports dual power protection Working Voltage range -38.4V~-72V |
-48V DC input Supports dual power protection
Working Voltage range -38.4V~-72V
|
-48V DC input
Supports dual power protection
Working Voltage range -38.4V~-72V
Support 220V / 110V AC input
|
Backplane Exchange capacity |
3.2Tbit/s |
1.5Tbit/s |
720Gbit/s |
Control Board Exchange Capacity |
1920 Gbit/s |
960Gbit/s |
512Gbit/s |
Access Capacity |
128*10G EPON
64*10G GPON
128*EPON
256*GPON
768*GE
|
48*10G EPON
24*10G GPON
48*EPON
96*GPON
288*GE
|
16*10G EPON
8*10G GPON
16*EPON
32*GPON
96*GE
|
Access Type |
Upstream interface: 10GE optical, GE optical/electricity Business interface: EPON optical port, GPON optical port, 10G EPON optical port, P2P FE optical port, P2P GE optical port, Ethernet optical interface
|
System Performance |
Layer 2 / Layer 3 wire-speed forwarding Support static router /RIP/OSPE.MPLS
BITS/E1/STM-1/Ethernet/1588v2/1PPS+ToD clock
Maximum support 1:256 splitting ratio
Maximum support 60KM logical distance
|
http://www.ftthtech.com/