Product Details
Overview
IT-75100, IT-76100 Pneumatic Crush Cut Knife Holders
Made of high quality steel, it is suitable for cutting hard thick material or high speed strip. It uses a depth adjustment screw to easily control the downstroke overlap distance between the upper and lower inserts, helping to compensate for overlap when inserts wear. Unscrew the corner plate and rotate the bottom knife holder, the machine can adapt to different web path directions and get better efficiency results. In addition, the highest speed of the pneumatic crush cut knife holder can reach to 1200M/min.
Specification
Feature /Model |
NO 1T-75100 |
IT-76100 |
Knife holder material |
ZnAl |
W1 |
Knife h0lder life time |
6-24 months |
over 24 months |
Sitting tolerance |
- |
no more than 0.05mm |
Min slitting width |
10mm |
12mm |
Max.knife stroke |
16mm |
16mm |
Max.slitting speed |
100M/min |
100M/min |
Max air pressure |
6kgf/cm |
6kgf/cm |
Blade specifications |
76.2*17.5 |
76.2*17.5 |
Blade Material.Angle |
SUJ-2/SKD-11:30°45°60"/90° |
SUJ-2/SKD-11:30°45°60"/90° |
http://www.njheshen.com/